SWAPKART Thermal Compound Paste Use in Coolers Heat Sink for CPU and Chipsets (Grey, 30 g)
Material : ISOL 6, Heat Sink Compound. Colour : Grey, Packing Type : Injection, Weight : Approx. 30 g
Generally used as a thermal coupling of electrical / electronic devices to heat sinks such as base or mounting studs of transistors, diodes and rectifiers
It is used for maintaining a positive heat-sink seal that improves heat transfer from the electrical / electronic component / device to the heat sink or chassis, there by increasing the overall efficiency of the component / device
High thermal conductivity low thermal resistance electrically non-conductive, non-curing, non-capacitive, non-corrosive bleed resistant temp resistant from -50 to 210 C
Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
Specification: SWAPKART Thermal Compound Paste Use in Coolers Heat Sink for CPU and Chipsets (Grey, 30 g)
Brand
SWAPKART
Manufacturer
swapkart
Item Height
30 Millimeters
Item Width
30 Millimeters
Product Dimensions
3 x 3 x 3 cm, 35 g
Are Batteries Included
No
Country of Origin
India
Item Weight
35 g
8 reviews for SWAPKART Thermal Compound Paste Use in Coolers Heat Sink for CPU and Chipsets (Grey, 30 g)
4.0out of 5
★★★★★
★★★★★
4
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
R Sambathkumar –
I have purchased this thermal paste to apply on CPU due to change of motherboard. Due to syringe type, it was very easy to apply on the CPU . Within few minutes i was able to start the system and it worked like a charm. very effective cooling even after several hours of usage. Would strongly recommend to use it for CPU application.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jitendra K. –
The paste has good quality, so it was easy to apply, the temperatures have dropped significantly. Not to mention the 30g amount offered
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Shub –
It thermally conducts and is better than not using a paste, but other than that it does nothing. Of course you can’t expect anything else at this budget as well. Suggest NOT using for re pasting GPUs or processors turboing over 65 watts.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Manoj kumar –
Thank you for good quality product at reasonable price 👍
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Shub –
Good products Good quality
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
R Sambathkumar –
Average thermal paste gets expired very quickly as you can see there is water droplet in middle of my cpu (if you think it’s burnt then it’s not). If you want something good increase your budget the cooler master gel or even better at little extra price cooler master cryofuze violet. If you want value for money (expensive but best) go for grizzly thermal paste they makes the best long lasting thermal paste.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
SAB –
This thermal paste will suffice for most of your needs. My CPU was running at 60 °C earlier at idle temperatures, however, after application of this paste, it is now running at around 50 °C. So yeah, it gets the job done.
Until and unless you are overclocking and want the maximum drop in temperature possible, this thermal paste is the way to go.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Dinesh C. –
Working great with my laptop and pc and also budget friendly
R Sambathkumar –
I have purchased this thermal paste to apply on CPU due to change of motherboard. Due to syringe type, it was very easy to apply on the CPU . Within few minutes i was able to start the system and it worked like a charm. very effective cooling even after several hours of usage. Would strongly recommend to use it for CPU application.
Jitendra K. –
The paste has good quality, so it was easy to apply, the temperatures have dropped significantly. Not to mention the 30g amount offered
Shub –
It thermally conducts and is better than not using a paste, but other than that it does nothing. Of course you can’t expect anything else at this budget as well. Suggest NOT using for re pasting GPUs or processors turboing over 65 watts.
Manoj kumar –
Thank you for good quality product at reasonable price 👍
Shub –
Good products
Good quality
R Sambathkumar –
Average thermal paste gets expired very quickly as you can see there is water droplet in middle of my cpu (if you think it’s burnt then it’s not). If you want something good increase your budget the cooler master gel or even better at little extra price cooler master cryofuze violet. If you want value for money (expensive but best) go for grizzly thermal paste they makes the best long lasting thermal paste.
SAB –
This thermal paste will suffice for most of your needs. My CPU was running at 60 °C earlier at idle temperatures, however, after application of this paste, it is now running at around 50 °C. So yeah, it gets the job done.
Until and unless you are overclocking and want the maximum drop in temperature possible, this thermal paste is the way to go.
Dinesh C. –
Working great with my laptop and pc and also budget friendly