HiLetgo 2pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
The Board lead to all the I/O resources.
Board of MCU-based basic circuits, such as a crystal oscillator circuit, USB interface and USB power management circuits, and so on.
Use the current smart phones of Mirco USB interface, easy to use, USB communication and power supply can be done.
Equipped with high quality 1*40/2.54mm spacing of single rows of pins, ensuring excellent conductivecontact
Download with SWD debug interface, which requires a minimum of 3 wires to complete debug a download task
Specification: HiLetgo 2pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
Brand
‎HiLetgo
Manufacturer
‎HiLetgo
Country of Origin
‎China
Model number
‎3-01-1045-2pcs
Colour
‎2pcs
Item Weight
‎23 g
Package Dimensions
‎12.7 x 8.89 x 1.27 cm, 23 g
Item model number
‎3-01-1045-2pcs
Processor brand
‎ARM
Processor Speed
‎72 MHz
Processor Socket Type
‎DIP
Memory Technology
‎SRAM
Memory clock speed
‎72 MHz
Connectivity Technology
‎USB
Are batteries included?
‎No
Hardware Interface Type
‎USB
5 reviews for HiLetgo 2pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
5.0out of 5
★★★★★
★★★★★
5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Ronin –
If you want genuine BluePills then you can get them here. I tested these and they show as genuine and pass all the visual checks too. I’d recommend this seller.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Robert –
I’ve just begun to explore the world of STM32 after using Arduino for many years. These boards are much more powerful than a typical Arduino due to the faster 32-bit processor. I was able to successfully program these using the Serial Port on Pins A9 and A10, and was able to set up my Arduino IDE environment to program them easily. I used a USB-TTL converter but there many other ways to program these too. The USB is not the same as on an Arduino, so don’t expect to plug in a USB cable and have it work the same. These are programmed either through the Serial Port (A9/A10) or the 4-pin header on the end of the board using an ST Link programmer. I’m looking forward to building these into my next project and taking advantage of the faster processor.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
richard ingram –
These flash normally. No issues.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Fuller Family –
I am amazed at the capability of this Blue Pill for the price.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Robert –
Purchased these with the intent of both programming and checking to see if the ST chipset was original or a clone. Was not disappointed, the HiLetGo ones that I received were original ST chips and worked fine in all programmers (Arduino IDE/CubeIDE/CubeProgrammer) and passed the Blue Pill Diagnostics tests flawlessly.
Ronin –
If you want genuine BluePills then you can get them here. I tested these and they show as genuine and pass all the visual checks too. I’d recommend this seller.
Robert –
I’ve just begun to explore the world of STM32 after using Arduino for many years. These boards are much more powerful than a typical Arduino due to the faster 32-bit processor. I was able to successfully program these using the Serial Port on Pins A9 and A10, and was able to set up my Arduino IDE environment to program them easily. I used a USB-TTL converter but there many other ways to program these too. The USB is not the same as on an Arduino, so don’t expect to plug in a USB cable and have it work the same. These are programmed either through the Serial Port (A9/A10) or the 4-pin header on the end of the board using an ST Link programmer. I’m looking forward to building these into my next project and taking advantage of the faster processor.
richard ingram –
These flash normally. No issues.
Fuller Family –
I am amazed at the capability of this Blue Pill for the price.
Robert –
Purchased these with the intent of both programming and checking to see if the ST chipset was original or a clone. Was not disappointed, the HiLetGo ones that I received were original ST chips and worked fine in all programmers (Arduino IDE/CubeIDE/CubeProgrammer) and passed the Blue Pill Diagnostics tests flawlessly.