OJOS Screen Protector Compatible With 2016-2022 2023 Macbook Pro 13″ Model A1706 A1708 A1989 A2159 A2289 A2251 A2338(M1) M2 Chip Anti Scratch…
₹499.00
OJOS Screen Protector Compatible With 2016-2022 2023 Macbook Pro 13″ Model A1706 A1708 A1989 A2159 A2289 A2251 A2338(M1) M2 Chip Anti Scratch…
- Anti-glare matte technology which Removes glare and resists fingerprints
- Made from the highest quality Japanese PET Film with 100% Bubble-Free Adhesives for easy installation and no residue when removed
- Highest Quality Multi Layer Premium Film with self-adhering surface, leave no residue when removed
- Easy to install: the film with automatic adsorption layer can reduce bubble air and be easier to paste; leave no residue when removed
- This SIZE is designed for MacBook Pro (13-inch, 2016 2017 2018 2019, 2020 Two / Four Thunderbolt 3 Ports). (Model A2159/A1706/A1708, with or w/out Touch Bar). Not for early versions
Specification: OJOS Screen Protector Compatible With 2016-2022 2023 Macbook Pro 13″ Model A1706 A1708 A1989 A2159 A2289 A2251 A2338(M1) M2 Chip Anti Scratch…
|
8 reviews for OJOS Screen Protector Compatible With 2016-2022 2023 Macbook Pro 13″ Model A1706 A1708 A1989 A2159 A2289 A2251 A2338(M1) M2 Chip Anti Scratch…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
OJOS Screen Protector Compatible With 2016-2022 2023 Macbook Pro 13″ Model A1706 A1708 A1989 A2159 A2289 A2251 A2338(M1) M2 Chip Anti Scratch…
₹499.00
Buyer –
The protector itself is of good quality and fits perfectly within the bezels, once must align it perfectly before peeling off the layers(1 & 2) keep this in mind !. Trick is to clean you screen in a low dust environment and small dust particle is the biggest enemy of screen guards.
1).Guide the screen first using some sticky tape and stick the top left and right corners of the screen guard to the mac & make adjustments so the the protector aligns itself to all corners.
2). Peel only one thumb size of the bottom filament (1 side) that touches the screen from top left corner (I felt it easy…) and go along the way from top Left to Top Right (Dont go down or diagonal yet)… now if you see any bubbles make adjustment and use the dust sticker to remove any dust particles and keep the cloth that you have with eyewear handy this removes any smudges & its anti static to some extend.
3) Go all the way to Right corner and now you should see a perfect straight line from top… at this point you can pull down the protector towards bottom. At any point if you see dust particles pull the screen up make adjustments using the eye-ware cloth & dust remover sticker and go slowly…
4) if you see major bubble use old credit card as guide and go along the bubble and squeeze it out to nearby corner
5) once the bottom layer is completely peeled off, make adjustment to the protector by gently wiping off the bubbles away..
6) once you are satisfied remove the top layer off (2) and you should have a perfect screen protector, the sticky tape should have also got removed with the top layer (2)
this took more than 15-20 mins to complete the activity so do it only if you have patience and no dust at all in you room. The first attempt failed miserable and learnt my mistakes and my second purchase worked well based on the tips given above.
Jyotirmoy Das –
Installation was a bit difficult but the kit helped me a lot
Good adhesion After the first try there were some bubbles because of dust particles. I unstick it and remove dust using dust remover (given in kit) and then all bubbles are removed 🙂
I use 2 credit cards to cover the whole area which helps a lot in the installation
Virender Dhiman –
Its a perfect fit for Macbook Pro M1.
In the package it was written that it is for Macbook Air but not to worry it can be used for both Macbook Air and Macbook Pro M1.
Quality is very good, Need patience while applying to have bubble free application like me 😋.
Its a matte screen Guard.
Placeholder –
Nice 👍
Virender Dhiman –
The screen protector itself is good for the money. No installation kit provided so you are on your own to clean & remove gum residue which will be enough to drive you crazy as it fitment is a fight. The cutout is not aligned properly which requires fiddling multiple times which causes gum residue to be left behind on the screen. It had to be taken off & reapplied so many times that it has 1000s of bubbles now.
I’ll stick with Spigen.
Dipanshu Gupta –
Pros:
– Perfect fit for 13″ Macbook Pro 2016-2020
– Easy to install when screen is clean
– Oleophobic, Fingerprint and dust resistant
– Anti glare (reduces light reflection significantly)
– thin enough for you to add a webcam cover slide
– given it’s durability, it’s priced right
Cons:
– slightly reduced display quality due very minor rainbow effect (tiny dots) all over the screen (manufacturer may need to increase adhesive a little)
Review:
Fits perfectly to my 13″, 2020 MacBook Pro A2251. Easy enough to install once you clean screen with laptop cleaner liquid and cloth that leaves no residue after wiping. Lastly, keep keyboard and environment dust/pollen free and try to align it from the top edge of screen, never start from side. It automatically does the rest, just go slow. I just got a couple of bubbles which i was able to remove easily by going back a little and then pressing the film against screen gently.
Most importantly, not only in is oleophobic and fingerprint resistant, but also anti-glare. Naturally, display quality isn’t at 100% anymore but given how good retina displays have gotten, it’s only noticable when you’re really trying to compare. I’ve posted a picture to show you how well it blocks the glare for a tubelight reflection that’s barely 5-6 feet far.
Dipanshu Gupta –
i totally dislike it because i am not perfect at applying it. I got so many dust bubbles and air bubbles which i could’nt remove so i removed it totally and kept it somewhere. my whole money is waste. My macbook pro has excellent retina display but this matte screen protector is just making it look so old fashioned and also not able to see the screen in hd view. my suggestion: please please think before buying this product or else your money is wasted.
Buyer –
instructions unclear and doesn’t stick well to the screen , so many air bubbles between screen , i want to request return