Kingwin SSD/SATA to IDE Bridge Board Adapter, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, 3.5 Inch HDD, & Compatible w/ SATA I/II/III…
₹1,672.00
Kingwin SSD/SATA to IDE Bridge Board Adapter, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, 3.5 Inch HDD, & Compatible w/ SATA I/II/III…
- Convert all SATA devices to IDE
- Data transfer rate up to 3.0 Gbps
- Two LED indicators for “power on” (green) and “HDD” (red)
Specification: Kingwin SSD/SATA to IDE Bridge Board Adapter, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, 3.5 Inch HDD, & Compatible w/ SATA I/II/III…
|
6 reviews for Kingwin SSD/SATA to IDE Bridge Board Adapter, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, 3.5 Inch HDD, & Compatible w/ SATA I/II/III…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Kingwin SSD/SATA to IDE Bridge Board Adapter, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, 3.5 Inch HDD, & Compatible w/ SATA I/II/III…
₹1,672.00
Bruno Longpré –
I used this to install an SSD in my original Xbox – the boot time is a little long (there’s no M/S/CS jumper on the adapter) and I had to source an 80-wire PATA cable (which are almost as rare as a good condition IDE HDD), but it works fine!
Barr –
I’m so glad this exists. Had an old pc that was ide only converting to another connection. This allowed me to use a sata as a test drive installing newer OS to see if a 30 year old printer pc could handle it. I’m happy with it.
Anand S. –
It’s the other way round for me. I needed an adapter to connect an old PATA HDD to IDE port computer. And there is no return option for this purchase. They should have written instruction correctly and precise.
Ben –
Satisfait
Manuel Díaz Pacheco –
El adaptador cumple su función. Yo lo he empleado para adaptar un SSD a una iMac G4 (lamp), reemplazando su HDD IDE (ya no se fabrican esos discos). Funcionó a la perfección. Sin hacer ninguna modificación.
Bruno Longpré –
This adaptor is the one you’re looking for. Just beleive me.
You can choose from IDE to SATA or SATA to IDE by switching jumper from position “B” to “C” : Clever.
Your only downside is the fact that you will have to have only ONE drive on your IDE cable, since there is no jumper for Master/Slave selection.
Delivery was very fast.