ALKETRON Quantum Cache Series – Over clocked Extreme Gaming Memory with Heat Sink – 8GB DDR3 RAM 1866MHz CL10 14900u PC3 UDIMM for Desktop PC – 3…
Assembled In India, Door to Door pickup & after sales services available all over India | ALKETRON Quantum Cache Extreme Gaming RAM (Memory) – DDR3 (SDRAM) for Standard and Gaming Desktop PC with heat sink
8GB DDR3 | 1866MHz | DUAL CHANNEL | 1.5v | UDIMM | 240 PIN | Unbuffered | CAS Latency – CL10 – PC3-14900u | Compatible with INTEL & AMD. Backward compatible to support motherboards with 1333MHz/1600MHz frequency. This RAM unit is manufactured to function at 1866MHz MAX frequency, if your PC is showing lesser frequency please change your motherboard settings to work at MAX available speed(frequency)
Mid Level & Professional Gaming Desktop PC – Over Clocked Durable Gaming Memory with Heat Sink, Optimized circuit design for higher efficiency and lower heat generation | Backward compatible and supports 1600 MHz frequency Motherboards
Over Clocking & XMP settings ALLOWED – Warranty not void when used in over clocking mode; 3 years warranty against manufacturing defect only, . After sales services available all over India, Contact ALKETRON Computers
NOTE: Check Compatibility before Purchase. All ALKETRON RAM are 100 % tested and undergo a 2 stage testing. Please contact a computer hardware expert or email ALKETRON Computers to choose a proper compatible RAM Memory for your Laptop/Desktop PC
Specification: ALKETRON Quantum Cache Series – Over clocked Extreme Gaming Memory with Heat Sink – 8GB DDR3 RAM 1866MHz CL10 14900u PC3 UDIMM for Desktop PC – 3…
8 reviews for ALKETRON Quantum Cache Series – Over clocked Extreme Gaming Memory with Heat Sink – 8GB DDR3 RAM 1866MHz CL10 14900u PC3 UDIMM for Desktop PC – 3…
4.0out of 5
★★★★★
★★★★★
4
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
KoustubhPK –
Super fast
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Tejas pawar –
I ordered this ram this ram is no working and no returns no warranty claim door pick up available 👎👎
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
StuDDeriO –
The ram frequency work 1333 mhz and company claim that 1800 mhz.very very disappointed.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
viral –
The ram is good as based on price and range But if you ever need replacement It’s a long process No service centre I saw nearby
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Senthil kumar –
Best Quality & performance
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
RAJNI K. –
Cost-effective alternate to other RAMs. Cheap and fast
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
KoustubhPK –
The media could not be loaded.
 ALKETRON – Quantum-Cache 8GB-1866MHz DDR3,
I’m using this since week and seems performance of my machine is noticeably increased. Before I’m using at-most reliable single 4GB-Transcend DDR3 1333MHz-CL9 since 2011 and still it’s working like charm.
But I guess there’s day that every senior player needs a break and one night my motherboard said in my dream to utilize dual channels at least once in a life. So I started searching for good RAM, and nowadays DDR3 is really old school DIMM.
So I don’t want to spend such serious amount on my old machine as I’m not using this primarily. I almost made decision for Corsair Vengeance 8GB DDR3 Memory Kit but again my thought got changed for why not 2×8 as my motherboard supports up-to 2400MHz with 2xDDR3 DIMM (max.32GB). And for corsair I flew couple of butterflies from my wallet.
Moving further I found this option in this price with very less reviews, so bit skeptical about going with this brand but without taking chance I’m not able to make firm decision on that so finally I ordered this as Amazon gave 7 days replacement in case of any failure in promise.
I got this on time and installed in machine, I wonder how easily I breaks the deal, Everything just perfect and going well. I upgraded this slower system for no reason but just filling motherboard’s two slots. Otherwise single channelized 4GB RAM is more than enough for this outdated machine for me.
–== PERFORMANCE ==– I’m a gaming maniac person but not using this entry level machine for AAA titles but it’s playable some of the games with lower settings to stretch capabilities till the balls coming out of cabinet, and this RAM configuration helps to load everything up to the mark.
For gaming, you clearly understand that there is no difference in regular RAM and this fancy looking RAM but the different SPD and latency that we’ll get in higher prices.
If you running RAM in single channel which really affects on performance loss up-to 40%. Always go with good pair of stick if your motherboard supports dual channel with appropriate band frequencies. (no matter 2×2, 2×4, 2×8)
Increasing RAM sizes is not mean to jet fuel for your system. so don’t expect graphical improvement or extra FPS while gaming with old school processors after installing any high-end RAM into your machine.
RAM performance takes place when you executes large programs and multitasking to commits workflow smoothly.
–== PROS ==– 1) It’s good to see Make In India. 2) It comes with heat-sink to cool stick for consistent output. 3) Comes with 3 year limited warranty period.
–== CONS ==– 1) A RAM with a CAS takes 11.0 RAM clock cycles to complete the task. (lower the latency better the performance) and it advertised as CL-10 which is false but it is OK with overclocked 1866MHz.
–== DO’S ==– 1) Must check your motherboard model and refer manual before installing new hardware to avoid compatibility conflicts. 2 When installing RAM check the pin architecture and the position while inserting and make sure it pressed by thumbs until click sound. (Do not press harder.)
–== DON’T ==– 1) Do not use hybrid RAM configuration. (it affects badly on performance.) 2) Avoid different RAM brands as every manufacturer clocks it differently even it has similar MHz. 3) Do not touch over the PINS, as it delicate part and might possible to left hand prints on that. 4) While installing RAM make sure that it just in place, one of common problem of people which is not getting recognized by system because of improper fits. 5) Always check the frequencies that your motherboard supports, if it is higher than that it will automatically lower it down so you won’t able to get it’s optimum 1866 MHz. 6) Don’t configure it with any other DIMM which clocked below than this, it may not detected for system or may causes to failure the board or being under-performed based on board to board.
–== VERDICT ==– If you going with cheap quality DIMM always consider the risk of receiving fake module. And for the sake of current time, spending too much money on DDR3 type is also never being wise decision as well.
*So winding things up you can absolutely include ALKETRON into your cart.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Anil Chauhan –
It’s the cheapest 16gb ddr4 ram available right now , and there is no compromise in the quality, it can easily compete with rhe corsair ram
KoustubhPK –
Super fast
Tejas pawar –
I ordered this ram this ram is no working and no returns no warranty claim door pick up available 👎👎
StuDDeriO –
The ram frequency work 1333 mhz and company claim that 1800 mhz.very very disappointed.
viral –
The ram is good as based on price and range
But if you ever need replacement
It’s a long process
No service centre I saw nearby
Senthil kumar –
Best Quality & performance
RAJNI K. –
Cost-effective alternate to other RAMs.
Cheap and fast
KoustubhPK –
The media could not be loaded.
 ALKETRON – Quantum-Cache 8GB-1866MHz DDR3,
I’m using this since week and seems performance of my machine is noticeably increased. Before I’m using at-most reliable single 4GB-Transcend DDR3 1333MHz-CL9 since 2011 and still it’s working like charm.
But I guess there’s day that every senior player needs a break and one night my motherboard said in my dream to utilize dual channels at least once in a life. So I started searching for good RAM, and nowadays DDR3 is really old school DIMM.
So I don’t want to spend such serious amount on my old machine as I’m not using this primarily. I almost made decision for Corsair Vengeance 8GB DDR3 Memory Kit but again my thought got changed for why not 2×8 as my motherboard supports up-to 2400MHz with 2xDDR3 DIMM (max.32GB). And for corsair I flew couple of butterflies from my wallet.
Moving further I found this option in this price with very less reviews, so bit skeptical about going with this brand but without taking chance I’m not able to make firm decision on that so finally I ordered this as Amazon gave 7 days replacement in case of any failure in promise.
I got this on time and installed in machine, I wonder how easily I breaks the deal, Everything just perfect and going well. I upgraded this slower system for no reason but just filling motherboard’s two slots. Otherwise
single channelized 4GB RAM is more than enough for this outdated machine for me.
–== PERFORMANCE ==–
I’m a gaming maniac person but not using this entry level machine for AAA titles but it’s playable some of the games with lower settings to stretch capabilities till the balls coming out of cabinet, and this RAM configuration helps to load everything up to the mark.
For gaming, you clearly understand that there is no difference in regular RAM and this fancy looking RAM but the different SPD and latency that we’ll get in higher prices.
If you running RAM in single channel which really affects on performance loss up-to 40%. Always go with good pair of stick if your motherboard supports dual channel with appropriate band frequencies. (no matter 2×2, 2×4, 2×8)
Increasing RAM sizes is not mean to jet fuel for your system. so don’t expect graphical improvement or extra FPS while gaming with old school processors after installing any high-end RAM into your machine.
RAM performance takes place when you executes large programs and multitasking to commits workflow smoothly.
–== PROS ==–
1) It’s good to see Make In India.
2) It comes with heat-sink to cool stick for consistent output.
3) Comes with 3 year limited warranty period.
–== CONS ==–
1) A RAM with a CAS takes 11.0 RAM clock cycles to complete the task. (lower the latency better the performance) and it advertised as CL-10 which is false but it is OK with overclocked 1866MHz.
–== DO’S ==–
1) Must check your motherboard model and refer manual before installing new hardware to avoid compatibility conflicts.
2 When installing RAM check the pin architecture and the position while inserting and make sure it pressed by thumbs until click sound. (Do not press harder.)
–== DON’T ==–
1) Do not use hybrid RAM configuration. (it affects badly on performance.)
2) Avoid different RAM brands as every manufacturer clocks it differently even it has similar MHz.
3) Do not touch over the PINS, as it delicate part and might possible to left hand prints on that.
4) While installing RAM make sure that it just in place, one of common problem of people which is not getting recognized by system because of improper fits.
5) Always check the frequencies that your motherboard supports, if it is higher than that it will automatically lower it down so you won’t able to get it’s optimum 1866 MHz.
6) Don’t configure it with any other DIMM which clocked below than this, it may not detected for system or may causes to failure the board or being under-performed based on board to board.
–== VERDICT ==–
If you going with cheap quality DIMM always consider the risk of receiving fake module. And for the sake of current time, spending too much money on DDR3 type is also never being wise decision as well.
*So winding things up you can absolutely include ALKETRON into your cart.
Anil Chauhan –
It’s the cheapest 16gb ddr4 ram available right now , and there is no compromise in the quality, it can easily compete with rhe corsair ram