5V 2A Power Supply Board (PCB) (220V AC to 5V DC SMPS Power Supply PCB Circuit)
220V AC to 5V 2Amp DC Converter
Tiny Size 40mm X 40mm x 15mm thickness
High Class component & PCB with Short circuit Protection
IC & optocoupler based voltage Regulation
Best Suitable For Bluetooth / wifi modules & Chargers
Specification: 5V 2A Power Supply Board (PCB) (220V AC to 5V DC SMPS Power Supply PCB Circuit)
Brand
‎Electronic Spices
Manufacturer
‎Electronic Spices
Model
‎5V2A220VT5VPCB
Product Dimensions
‎5 x 5 x 3 cm, 200 g
Item model number
‎5V2A220VT5VPCB
Compatible Devices
‎Amplifier
Mounting Hardware
‎5V2APOSUPP
Number of items
‎1
Batteries Required
‎No
Form Factor
‎ATX
Country of Origin
‎India
Item Weight
‎200 g
8 reviews for 5V 2A Power Supply Board (PCB) (220V AC to 5V DC SMPS Power Supply PCB Circuit)
3.6out of 5
★★★★★
★★★★★
3
★★★★★
2
★★★★★
1
★★★★★
1
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Srinu –
Good product
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Bapu Vitthal Gavhane –
In small size, value for money
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Placeholder –
This board is not a 2A board. Not able to boot esp8266.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Aadhaar Sharma –
The circuits were clearly used and damaged. Such a waste of money!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
usha –
Works very well. Value for money.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Santosh –
It works fine. However doesn’t delivered 2A. Above 800mA it heats up. Other observations. Has 10V rms AC ripple components over the 5.2V DC. Which makes it not suitable for a delicate applications like powering micro controller circuits without additional filtering of ripples. Can be verified by simply connecting a diode in series with multimeter and check in multimeters polarity change. Even though series diode multimeter shows both +5v as well as -5v on polarity change. Instead of showing 0v in one of the polarity. Works fine adding a diode bridge circuit and a 1000uF 16v capacitor at the 5V output. Also no holes or a space to fix the PCB with screws/nuts.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sai –
Good product. Working as advertised. Not any problem.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sai –
It’s stable and very compact. I have used it to drive 8 Channel 5V relay and 8 Touch plate..Good quality product.. Just go for it.
Srinu –
Good product
Bapu Vitthal Gavhane –
In small size, value for money
Placeholder –
This board is not a 2A board. Not able to boot esp8266.
Aadhaar Sharma –
The circuits were clearly used and damaged. Such a waste of money!
usha –
Works very well. Value for money.
Santosh –
It works fine. However doesn’t delivered 2A. Above 800mA it heats up.
Other observations.
Has 10V rms AC ripple components over the 5.2V DC. Which makes it not suitable for a delicate applications like powering micro controller circuits without additional filtering of ripples. Can be verified by simply connecting a diode in series with multimeter and check in multimeters polarity change. Even though series diode multimeter shows both +5v as well as -5v on polarity change. Instead of showing 0v in one of the polarity. Works fine adding a diode bridge circuit and a 1000uF 16v capacitor at the 5V output.
Also no holes or a space to fix the PCB with screws/nuts.
Sai –
Good product. Working as advertised. Not any problem.
Sai –
It’s stable and very compact. I have used it to drive 8 Channel 5V relay and 8 Touch plate..Good quality product.. Just go for it.