LCD Screen for Photon Mono 4K
₹2,317.00
LCD Screen for Photon Mono 4K
- Compatible Printers: PLEASE KEEP YOUR ORIGINAL CABLE AND USE IT TO CONNECT.Compatible with Anycubic Photon Mono X 3D LCD Resin printer. Please make sure your original screen is PJ089Y2V5, not TM089CFSP01. Choose the same screen as the original screen! Otherwise it will not work!
- High Resolution: 8.9 inches LCD with 3840×2400 high resolution ensures your printing with high precision.
- Sturdy Packaging: The LCD screen is packaged in a sturdy box, allowing our products to be delivered in perfect conditions!
- Easy Installation: The 4K LCD Screen installation are straightforward and easy.
Specification: LCD Screen for Photon Mono 4K
|
13 reviews for LCD Screen for Photon Mono 4K
Show all
Most Helpful
Highest Rating
Lowest Rating
Aryan –
The media could not be loaded.
I used ender v3 first it can access flies soo the g-code keep organised files to access easy in this can’t access flies soo Struggle to search the particular g-code , and next thing is spring adjustable bed in this has fixture bed but it is magnetic bed so easy to remove and fix again, and next thing is controller,suppose power cut the printing will stop it has resum but in ender v3 I will connect powerbank to keep standby but in this I can keep standby like that
But is awesome 😎 cool nice it have magnetic bed and direct extruder so low wast of filament and it quite awesome 👍
Ravi Keerthi –
The media could not be loaded.
Best printer to have as a first time beginner which is easy to assemble and run on the go, settings are so easy to handle with and precise accuracy for printing, my first print came out really well finished, initially some Z offset has to be set as per the manual and it works I suggest to have a z-offset of -1.65 to -1.78 which is best to print with precision. It’s a best printer to go with. All parts look so standard and quality is way better than other printers in market.. best to go with Kobra Neo.
Lewis –
I was pleasantly surprised to have the package arrive earlier than specified. This was really well packaged and there was no damage what so ever. Reading the specifications I knew the build area would be big but nothing could prepare me for the reality of the difference in machine and vat size. Bed leveling was simple and easy to do. The first print was successful however I have had a couple of failed prints but that was down to my own inexperience with the slicer program. Print quality is extremely good and print time is significantly reduced compared to my other resin printers. I would advise that your resin is wel stocked as it does take a fair amount to fill the vat. I would highly recommend the machine and as soon as I can I will definitely be getting another one.
Maheswari Technical Services –
Adhesion is some what good, print quality is good, but not excellent, a good product for beginners
Andy –
I’ve had two of these so far and both have been sent back. It feels like a sturdy machine but after only a few uses it becomes apparent that it lacks any quality parts. Both machines I had started to make clunking sounds when the build plate was travelling. The first time Anycubic sent me a new leadscrew and it was a pain to install but it fixed the issue. This time on the second machine I just can’t be bothered, it’s not worth the effort. If print quality was better then perhaps I’d keep it but this thing has the same XY pixel resolution as an Elegoo Mars Pro and it fails to capture detail as well. The surface quality of the print is like sand. No other printer I have produces prints like this. Having to reduce the UV power because it’s like a supernova also doesn’t help much.
So far the Elegoo Saturn has been a much better machine with better print quality, even if I did have to replace the rails and carriages because that, like this, is a cheaply produced piece of garbage.
Karan Barman –
I am something of a veteran both of 3D printing and Anycubic 3D printers. This machine has been bought as an upgrade from my Photon S, which has served me well for over a year with minimal fuss and very few failed prints. It will also be working alongside my two filament-based printers (also Anycubic).
DLP (resin) 3D printers are not new, they’ve been around now for many years and while the machines have continued to improve, both in performance levels and price point, their biggest downside is their inability to print large, detailed objects. Filament based printers traditionally have much larger build areas but there is normally a sacrifice with the quality. If only there was a way to combine the larger print volumes offered by FDM printing but to also have the detail and quality of DLP…
The printer arrived well packaged and well within the specified delivery time. Included in the box are the usual items you would expect with a new resin printer – gloves, mask, resin filters, scraper, USB flash drive and instructions. A full manual is also included on the flash drive. What’s not included is the resin, not a problem for me as I’m upgrading so I have plenty but be aware that you’ll need to buy some before you start!
The only assembly required is to install the build plate and level it (a quite simple and easy task), then install the resin chamber and fill with resin. There is a “Max” level mark on the resin tank – a very handy addition and something that’s missing from the old Photon S, which sometimes could lead to accidental overfilling!
First impressions compared with the Photon S is that the build quality looks and feels much sturdier. The Photon S is mainly plastic in its construction, whereas the Mono X is metal; only the hood is plastic. Power supply, power switch and USB port are all mounted on the right-hand side of the printer, with the USB port mounted towards the front for easy access. Those familiar with Anycubic printers will be familiar with the touch screen operation, layout of the user interface and the setup options. What is included here is the option to connect to wifi, which I have yet to test – even if this is just to allow monitoring, it’s something I’ve not had as standard before from Anycubic, or indeed any of my previous 3D printers!
Slicing software is included on the USB flash drive, which although I’ve installed, I’ve chosen to stick with Chitubox, purely because it’s the slicing software I’m most familiar with and it fully supports the Mono X.
This being a mono screen, the exposure times are greatly reduced. This means that prints are far quicker than standard DLP printers. The light is from an LED array and the light spread is constant across the build plate. A problem with cheaper machines is that the light source is very central and uneven, which requires masking and careful placing when printing to be able to use the entire build plate. With the Photon S and the Mono X, the light is evenly spread so this issue is eliminated.
Print times when compared to the Photon S are notably faster, roughly twice as fast, which should reduce the wear on the screen as the exposure times are much less. As far as print quality goes, the results so far are on a par with the old Photon S – the same great detail but with the added bonus of a much bigger build volume.
In operation, the machine is louder than the Photon S; There appear to be two large fans mounted in the base and these produce the bulk of the noise, however, the noise is still not intrusive, and the machine is fully usable in my office while I work.
My biggest concern was the apparent lack of odour filtration; The Photon S has two fan-extracted charcoal cartridges behind the build plate in each corner and these drastically reduce the smell when printing (when compared to the Wanhao Duplicator 7 I had previously) There is no filtration system on the Mono X, however, the hood is sturdy and seals well, trapping the smells inside. As with any resin-based printer, it should be used in a well-ventilated area. After printing for several hours, there was no noticeable difference with the odour created by the Mono X vs the Photon S.
Overall, it is a well-built machine (as it should be for the price) and is a good compromise between the standard, smaller DLP printers and the larger volume FDM printers currently available. This machine gives you the ability to print larger items without sacrificing print quality and the mono screen technology means that you will be printing much faster than traditional DLP printers.
Definitely a worthwhile investment for me!
Karan Barman –
After a power outage, my printer resuming function is not working .
Dhanakoti –
Good quality and accuracy prints , in this price range
Jaspreet Singh –
I decided to upgrade from my Photon S because the build volume is much much bigger. Probably 2/3 bigger. It makes it possible to print large items without splitting them up. So much less hassle. It’s HUGE! See the photo
In addition to that it prints faster than the Photon S which, when you are a business user on a budget helps loads. I was originally worried about the build quality as I had heard some stories but everything works perfectly.
When I ordered I expected it by Wednesday and it arrived a full 3 days early.
One other thing to add is that these are sent from a UK warehouse so I didn’t get any nasty Duty to pay.
It’s a great printer, I have to say and the build quality is significantly better than the Photon S., It feels special.
Maheswari Technical Services –
The media could not be loaded.
I am writing this review after taking my first print. Earlier during Diwali time, I ordered Ender 3, 2023 version. But the item received was 2021 version. Hence I returned. Taken this printer. My decision seems to be right.
Pros:
1. Packing is too good.
2. Comes in 80% assembled condition unless like Ender 3 wherein you require lot of assembly and adjustment. It took about one hour maximum to complete the assembly.
3. After assembly, absolutely no adjustment was required. I did only auto bed levelling. Auto bed levelling is too good. That’s it. Every part was in tact and did not need any tightening or loosening. Great 👍
4. Magnetic base.
5. Nice cute LCD display.
6. Very less noise during operation.
7. Clearly written user manual and assembly video.
8. What next?🤔 All great 😃
Cons:
1. If at all I say, it’s the power cord given with the printer which is not suitable for Indian 3 pin sockets. You may use it; but not preferable as Earth pin is of European version. I tried with that. As Earth connection is open, I could see leakage voltage of SMPS at the printer. Though not harmful, not advisable. Hence, I have used my own cable. Now perfect.
It is my first printer. Charming experience. With the sample filament given along with the printer I printed ” Shark beer bottle opener” with the given g code in the SD card. It took about 17 minutes to print the same with default settings. Came out very nicely. 👏👏
This printer is really good. Buy it blindly. You won’t regret.
Thanks to the manufacturer and Amazon. 🙌
Ashutosh –
Delivery was on time from amazon.
Installation was super easy as the product comes semi assembled. Couple of screws fastening and we should be ready to print.
All the instructions are readily available.
Has all the features which are available in other brand printer which are slightly costly.
Auto bed levelling is a superb feature and Minimum Z offset is something which we need to do and it takes few tries.
After all these efforts with knowledge of certain print setting, configuration and calibration, we should printing out 3D models.
Overall best printer at an affordable price with all necessary features.
25/08/2023 : Printer worked great and now there is a problem with the extruder. Ayucubic team does not support as it not sold by them. 3idead does not even care to listen to the problems. 1 year warranty is just a false promise made by them. Even after multiple emails and call, there wont be any support from them.
We also dont get any spare parts for this model or company in India.
Better not to buy any items from Anycubic in India or any product from 3idea. Buy from trusted and reputed companies like creality.
srisrihari –
Iv been 3D printing for around 4 years now with filament printers. I’ve been toying with the idea of resin really wish I had done it sooner.
Print quality is very clean plus not a lot of prep work to paint afterwards.
The build size for the money is massive. I print a lot of cosplay items for people and this is a really good upgrade from fdm printers.
Setup nice a quick very easy to get yourself printing right away, and the speed it prints items is fantastic. Would recommend the wash and cure station, will save you alot of time that will be my next purchase. Big thumbs up to this setup
Just remember resin is messy, so have plenty of paper towel and IPA to hand to wash and wipe down and keep everything clean, you look after it, it will look after you, is what I run with thank you.
Ravi Keerthi –
this printer will have 100 problems after a few prints within the first month i had so many problems now sd card fails y axis moves automatically multiple print failures half of the filament gets wasted in figuring out the problem this is a nightmare for 3d printing if u really want to print for fun or for work look up wol3d i visited their office thyey have solutiuon for all the type of task which is required anycubic is the worst brand dont ever buy it if u think this is a fake post check youtube or google u will not find any sources saying positive about it no support no nothing